3HL series chiller groups are designed for cooling needs between 300kW-1450 kW.
FUNCTION AND ADVANTAGES
Very advanced control and control system
Retrospective alarm reporting can be received,
Automatic capacity control can be done in compressors.
The necessary pressure and temperature values for gas conversion can be read,
Temperature and pressure sensors can be calibrated,
Control the flow switch to control the water circulation,
Life synchronization can be done in compressors and fans,
The possibility of remote intervention by connecting MODEM (OPTIONAL),
again MODEM can be connected to the mobile phone via MESSAGE, the computer can be sent to the report by mail (OPTIONAL).
SCREW compressor
In order to save energy on the devices, BİTZER-Germany brand SCREW compressors which can operate with a capacity control between 25% and 100% are used.
Electronic expansion
The electronic expansion valve (expansion valve) can be used to make water from 0 ° C to + 30 ° C. Thus, a much more precise and stable gas cycle is provided than mechanical expansion valves.
Shell & tube (tube evaporator)
Cleanable, high efficiency and tube heat exchanger are used.
Energy saving fans
EBM brand fans are used as standard. These fans are speed controlled for low power consumption. Condenser fans operate linearly between 0% and 100% according to ambient temperature.
High flow stainless pumps
The pumps used for the water circulation are high flow and stainless steel.
Stainless steel housing for outdoor use
The outer body is completely made of stainless material so that the chiller can operate without any problems in the outdoor environment.
Air cooled condenser
The condenser is selected from -20 ° C to + 45 ° C.
State-of-the-art components
All equipment used in chiller consists of the latest technology components. Each device is tested after manufacture and delivered after 100% perfection. Therefore, the device works with high performance even under the most severe conditions.
Use of environmentally friendly gas
R134A gas which does not damage the atmosphere is used. Gases such as R22 are not used and no gases are used.
